Contact Us

Company office contact information:


Phone+8613763134250

Fax: +8676981515497

E-mail: info@hoohahk.com 

Website:www.hoohahk.com

Head office:

ROOM 1205, 12/F,

 TAI SANG BANK BUILDING, 

130-132 DES VOEUX ROAD

CENTRAL, HONG KONG 

Factory:

Gate Square West Road No. 105-1,Humen Town, Dongguan city,Guangdong Province.



  • Copper-Drawing-machine
  • Cross head
  • Cable Production Solutions
  • Extrusion Machine
  • Cantilever SingleTwister
FAQ

Extruders adjustable head eccentric cause and remedies

2015/09/19

  Head extrusion machine, there are two, one is free to the nose, eccentric adjustment-free; other is adjustable nose, adjustable eccentricity Here are some adjustable head extruder eccentric reasons. and correction methods:
  The eccentric causes are:QQ截图20150922013551.jpg
  1 dies not adjust
  2 die wear
  3 wrong mold, mold is too large
  4 core, die sets the distance is too large
  5 extruder nose uneven temperature
  6. nose clogged with impurities
  Remedy:
  1 alignment mold, the mold with the core
  2 Replace the mold
  Press the extrusion machines to process requirements, according to the diameter size of the selected mode
  4. the core, die sets raised a suitable location
  5. appropriate increase in head temperature
  6 clean up the nose

     Information from: stranding machines, wire extrusion machine, wire and cable equipment, extruders professional manufacturer, HOOHA Company Limited site: www.hoohahk.com