• Copper-Drawing-machine
  • Cross head
  • Cable Production Solutions
  • Extrusion Machine
  • Cantilever SingleTwister

HOOHA Bunched Cable Vertical Flame Spread Tester

HOOHA Bunched Cable Vertical Flame Spread Tester
Product Name : HOOHA Bunched Cable Vertical Flame Spread Tester
Product ID : HH-BT001
Brands : HOOHA
Delivery dates : 30 days
Warranty : 12 month
Color : customized
Voltage : 380V
Directions

Bunched Cable Vertical Flame Spread Tester, 

VFT-716, IEC 60332-3, KS C IEC 60332-3-10, 21~25

Product numberHOOHATech-GBT18380B

Product characteristics:

HOOHA Bunched Cable Vertical Flame Spread Tester in accordance

with the relevant provisions of UL1685, GB18380.3 standard wire and cable burning test requirements designed equipment. And in accordance 

with IEC 60332-3-10, KS C IEC 60332-3-21 ~ 25 (A ~ Class D) standard.

4.jpg

Introduction

HOOHA Bunched Cable Vertical Flame Spread Tester in accordance with the relevant provisions of UL1685, GB18380.3 standard wire and cable burning test requirements designed equipment. And in accordance with IEC 60332-3-10, KS C IEC 60332-3-21 ~ 25 (A ~ Class D) standard.

TESTECH Bunched Cable Vertical Flame Spread Tester is used to bundle cable or fiber optic cable to detect vertically mounted under specified conditions for vertical flame spread inhibiting the ability of the instrument, the power cables, control cables, fiber optic cable bundle burning test Preparation means. When given a certain amount of housing supply of gas and the use of standard ignition source of ignition, this instrument can be used to test for vertical flame vertical flame vertical diffusion to electric cables and wires of state .In addition, if the tester burner adjustment of 20 degrees can be achieved by IEEE 383 (IEEE 1202) testing standards. Equipment can be equipped with heat release instrument configure the port, with the gas analyzer can measure the thermal power values such as HRR (heat release rate), SPR (smoke generation rate) and so on.

3.jpg

User Experience:

1, high intelligence, easy to operate;

2, professional industrial design, beautiful, generous;

3, precision equipment, security, and stability;

4, microcomputer control system, intelligent testing process; no manual timing and related operations;

5, corrosion-resistant stainless steel housing;

ModelTTech-GBT18380B
2.jpg

Standard

UL1685
• IEC 60332-3-10
• EN 50399 
• GB/T 18380.31

IEC 60332-3 :Test on Electric cables under fire conditions 
part 3 : Test on bunched wires or cables 
• KS C IEC 60332-3-21 : Category A F/R 
• KS C IEC 60332-3-22 : Category A 
• KS C IEC 60332-3-23 : Category B 
• KS C IEC 60332-3-24 : Category C 
• KS C IEC 60332-3-25 : Category D

Specification

Size

1,000(w) ×  2,000(D) ×  4,000(H)

Power

220 V AC, 60 Hz, 10 A

Weight

About 500kg

Utilities

Propane Gas Valve System, Ignition System

Case Features

1 Stainless steel test box the size of 1,000 ± 100 (W) x 2,000 ± 100 (D) x 4,000 ± 100 (H)mm. Interior surface of the case than the high ground, and the rear side covered with insulation material.

2With a standard stainless steel ladder, based on ladders GB / T18380.31 requirements;

3, alternate sample frame 2;

4, ladders made of stainless steel; corrosion resistant; easy to clean;

5In the lower part of the cabinet, from a position in front of the housing 150 ± 10mm has a 800 ± 20 (W) × 400 ±10 (D) of the air intake.

6, the inside of the box is mounted thermocouple type K thermocouples, 2mm in diameter

7The air flow inside the combustion furnace can be stably controlled at (5000 ± 500) L / min.

 1.jpg

Combustion System:

1Burner: with type propane gas burner, size 257mm × 4 5mm, opening a total of 242, three lines are arranged, respectively81,80,81 holes, hole diameter of 1.35mm, the distance between holes is 3.2 mm;

2, high-precision ball, control the gas off;

3, two meter: airflow and gas flow meter and control valve;

4, the front end of the combustion flame installation tester off tube to protect the propane gas tempering, so as to ensure maximum safety on the specimen

5, combustion angle: horizontal; automatic ignition device; (20 degrees adjustable is optional)

6, the burner air and gas flow rate must be supplemented temperature and pressure, while many traditional system ignores the impact of gas and air can be done automatically by a computer program the compensation process.

 

Control system:

1.PLC with large-screen touch screen control system;

2, automatic ignition system, automatic timing; Timing range 999min, accuracy 1s;

3, experimental data is automatically stored, free inquiry;

4, 40 minutes, 1hour timekeeping reminders;

5, the specimen mounts with electric crane lift.

 

Device parameters:

1The test box the size of 1,000 ± 100 (W) x 2,000 ± 100 (D) x 4,000 ± 100 (H) mm

2Anemometer accuracy 0.1m / s;

3 The air source anemometer range 8000L / min; outlet winds (5000 ± 500) L / min can be adjusted;

4Gas: 95% purity of technical grade propane (customer)

5, the gas flow control: Under 100kpa, 20 conditions

6,the combustion air supply: Propane (or LPG).

Specification

1, the size of 1,165 (W) × 2,165 (D) × 4,350 (H) mm

2, Console Size: 600 (W) × 750 (D) × 1,600 (H) mm

3, Power: AC 220V, 50 / 60hz, 15A

4, Weight:1,500kg


Inquiry
If you need any information before purchase, you can click our online service, If it is not availabl
Title:
 
Your name:
 *
Email:
 *
Telephone:
 
Message:
 *
Code:
   *
     Items marked with * have to be filled in