• Copper-Drawing-machine
  • Cross head
  • Cable Production Solutions
  • Extrusion Machine
  • Cantilever SingleTwister

High Frequency Spark Test Machine

High Frequency Spark Test Machine
Product Name : High Frequency Spark Test Machine
Product ID : HH-017
Output Voltage : 0.0~15.0KV R.M.S.
Test Voltage : 1.0~15.0KV R.M.S.
Cable Diameter : 0~7mm
Maximum Load Current : 4mA Resistive,40mA Capacitive
Operation Humidity : <90%RH
Directions

High Frequency Spark Test Machine

 1.jpg

Specifications:

Test Voltage:1.0~15.0KV. Cable Diameter: 0~25mm. Output Frequency: 2.5-3.5KHz normal. Fast recovery time after fault (0.1s)

 8.jpg

The Sine Wave Spark Tester is a fast and reliable instrument used in distinguish wire faults and detecting bare wires. Its high-speed fault detection feature gives you prompt information without worsening the condition of the wire after the test.

The use of high frequency (3KHz) enables a traditional commercial power frequency bead chain electrode to be shortened to 120mm HS015E Model.

The Sine Wave Spark Tester is quality-assured to meet your needs.

 

Basic Function

·         Fast recovery time after fault (0.1 second).

·         Occupies short space in line and with improvement factor of 50 compared to

·         traditional CT power frequency electrode.

·         Voltage Display: 0.0~15.0KV digit, 14.2mm LED display, Accuracy +/- 1% of reading

·         Output Control: Front Panel Reset in Manual Mode. Closure time is selectable

·         0.2s/2s/5s in main board by jumper JP, Form C relay contacts (250VAC/5A) for all

·         wire faults detected.

·         Limits the fault current without damaging the test equipment.

·         Short exposure time to corona does not degrade nor damage good insulation.

·         Distinguishes all wire faults and detects bare wire.

·         Safety Switch interlock.

 

Basic Specification:

Specification

HH-4025C High Frequency Spark Test Machine For Cable

Output   Voltage

0.0~15.0KV   R.M.S.

Test   Voltage

1.0~15.0KV   R.M.S.

Cable   Diameter

0~7mm

Maximum   Load Current

4mA   Resistive,40mA Capacitive

Output   Frequency

2.5-3.5KHznormal

Electrode   lengths

Bead   Chain 120mm

Fault   Indication

Indicating   lamp,Counting byDigital Counter

Output   Control

1 Form C relay Contacts(220VAC/5A) for all wire

faults and bare wire faults detected 

Input   Control

SP1, SP2   input interlock control

Operating   Model

Extruder   Continuous Application

Power Source

175~264   Volts, 180VA, Single phase, 50/60 Hz

Operation   Temperature

+4~45°C

Operation   Humidity

<90%RH

Signal   Cable Lengths

5M

Weight

Control   Unit =5 kg, Electrode = 8.5 kg

Dimension   Controller

360(L)x485(W)x90(H)   mm

Gauge   Head

330(L)x200(W)x390(H)

Line   Speed

2000   M/min. maximum*

-Warehouse and office

11.jpg

Inquiry
If you need any information before purchase, you can click our online service, If it is not availabl
Title:
 
Your name:
 *
Email:
 *
Telephone:
 
Message:
 *
Code:
   *
     Items marked with * have to be filled in