Cable laying methods

1. How Many Ways Of Laying A Cable Are There?

Answer: There are several ways of laying a cable. The most common methods are listed as follows;

• Directly buried in the ground
• Installed in the cable trench

• Installed in underground tunnels

• Installed on the internal wall or canopy of a building
• Installed on a bridge
• Laying in a drainage pipe

• Laying underwater

2. How To Connect A Cable Pipe?

Answer: A wire and cable pipe must be connected with a buckle and tube joint. If you intend to use welding, you must avoid direct butt welding. The connection should also be set with a section of thick pipe and then welded to avoid welding slag falling into the tube.

3. What Are The Requirements For Up And Down Bending Cable Core During The Production Of A Cable Head?

Answer: When bending the core, do not damage the paper insulation. The bending radius of the cable core should not be less than ten times the core of the cable. Production should be meticulous in making the core bending part with a uniform force. Otherwise, it will be easy to damage the insulation paper.